Loading / unloading Systems
在物流领域，我公司装卸平台可实现快速、安全的装卸货过程。装卸平台可以平衡月台 地面与不同运输车辆厢板的高差，无论是平板车还是集装箱车，装卸平台都能满足要求。 坚固的钢结构设计和高品质的材料，为所有的装卸货场提供了可
靠的选择。
In the field of logistics, the CYD Dock Leveler can achieve a rapid and safe loading and unloading process.The Dock Leveler can balance the height difference between the platform floor and the different transport vehicle panels. Whether it
is a flatbed or a container vehicle, the CYD Dock Leveler can meet the requirements.Solid steel design and high quality materials provide a reliable choice for all loading and unloading yards.
Product characteristics
产品特点
运输车辆靠近平台后，大门打开，持续按压控制键，平台抬升到最高位置，唇板自动打 开放开控制键，平台下落，直到唇板搭接到运输车辆车厢板，这时就可以安全进行装卸 货。装卸货完毕，持续按压控制键，平台复位。
After the transport vehicle is close to the platform, the gate is opened, the pressure control key is continuously pressed, the platform is lifted to the highest position, the lip plate automatically opens the control key, and the platform falls until
the lip plate is attached to the transport vehicle compartment plate, which can be safely loaded and unloaded.. After loading and unloading, press the control key continuously and reset the platform.
机械式装卸平台，不用电，任何时候任何地方 都可以使用，手动操作，弹簧举升，简单易用， 只需轻轻拉动面板上拉环，即可上升，然后人 工踩在面板前端，即可下降；配有安全撑杆， 两侧配有安全挡板，使用更安全；经过数项改 进，在
使用频率和寿命上远远超过国外同类产 品
Mechanical Dock Leveler No electricity. It can be used anywhere at any time. Manual operation, spring lift, easy to use Just gently pull the top ring of the panel to rise and then manually step on the front of the panel to descend Safety
support, safety baffles on both sides for safer use After several improvements, it far exceeds its foreign counterparts in frequency and life
液压式装卸平台
方便卸货，稳定性强，维修成本低 适用于装卸场地上各种车辆以及交通相对繁忙 的场所
Hydrauli c Dock Leveler
Easy to unload, high stability, low maintenance cost,Applicable to various vehicles on loading and unloading grounds and places with relatively heavy traffic.
特性
Features
400长及16mm厚板创出水平防滑水槽拱 桥和强化舌板，过渡更平滑 满焊及应力消除工艺 拱桥或强化后部过渡板 特别坚固可靠的罐装重桥铰链 一体式电动液压单元 保护伞安全支撑杆 台面与月台接缝由全场毛刷条密封
A (宽度)1800-2000 mm
B (长度) 2000-4000 mm
H (高度) 600 /500 mm
400 l ong and 16mm thi ck pl ate creates horizontal Anti -Sl ip si nk Arch bridge and reinforced tongue pl ate. Smooth transiti on. Full Welding and Stress Removal Process Arch bridge or reinforced rear transition plate Especially strong and
reliable can heavy bridge hinges Integrated Electric Hydraulic Unit Umbrella safety support bar The surface and platform seams are sealed by the full set of brushes
A(width) 1800-2000 mm
B(l ength) 2000-4000 mm
H(H) 600/500 mm
电动液压式卸货平台
摆动式前唇板其骨架均有高强度的压花防滑钢板制成，标准搭板厚度为16mm,中间铰链直径为55mm,铰 链枢轴直径为30mm,使用板的全部宽度和顶板相连接。 卸货平台采用精磨液压缸配合进口密封圈让油缸具有极佳的密封性能
Electric hydraulic Dock Leveler
The skeleton of the swinging front l ip plate i s made of hi gh-strength embossed Anti -Slip steel plates. The thickness of the standard spli nt plate i s 16mm, the di ameter of the middle hinge i s 55mm, and the diameter of the
hinge pi vot i s 30mm. The full width of the board i s used to connect the top pl ate.
The Dock Leveler adopts a precisi on grindi ng hydraulic cyli nder to cooperate with the i mport seali ng r ing to allow the cyl inder to have excellent seali ng performance.
液压式单缸卸货平台
使用场地：装卸场地、进出车辆相对较多的装卸货物场地，用以
提高卸货效率自动液压式卸货平台
基本机构：工作台面：8mm以上花纹钢板12#工字钢
基架：8#槽钢
液压系统：海普液压系统
安保系统：1.活动侧护板，保护卸台及人员安全，展开
的安全防护板可防止脚不小心被卡住2.汽车防撞橡胶垫，可以
保护卸台在汽车贴近时不被撞坏
使用参数：动载6吨，静载10载
最大行程：-300~+500mm
地坑尺寸：W+20，L+70
台面尺寸：标准系列
Hydrauli c single cyli nder Dock Leveler
Use of sites: loading and unloading areas, relatively large number
of vehicles in and out of loading and unloading areas to improve
unloading efficiency automatic hydraulic Dock Levelers
Basic organization: Working table: more than 8mm pattern steel
plate 12 # I-steel
base frame: 8 # slot steel
Hydrauli c system: Hydrauli c system
Security system: 1. Mobile side guard, protect the Dock Leveler and
the safety of personnel, the safety protection plate that can be
deployed to prevent the foot from accidentally getting stuck 2. Car
collision protection rubber pad, can protect the Dock Leveler from
being damaged when the car is close to.
Use parameters: 6 tons in motion and 10 in static
Maximum itinerary: -300 ~ +500 mm
Pit si ze: W +20, L +70
Table size: standard series